We have

Barnes large range of resins is suitable for any applications for any projects. Starting from model casts through to resin art. We have resin art supplies such as Epoxyglass

Bqueen is a quick setting polyurethane resin which is champagne/translucent in colour. It has slight internal bubbles when set. Easy to hand sand and finish Recommended for:Jewellery, Tinted Parts, Small Models, Props.Potlife & Demould:Work time – 2 mins / Demould time – 15-30 minsHardness & Type:Shore D72 +/-2 Rigid Polyurethane, 110cps

CLARITI is a low viscosity, ultra-clear epoxy resin used in potting and casting applications where an exceptionally clear resin is required. CLARITI exhibits excellent air release properties & its higher cured hardness allows it to be ground and polished. It is ideal for use in casting objects such as jewellery, decorative tableware, ornaments &…

Clear Gelcoat Marble Glaze is a UV stabilized, ortho-NPG polyester specifically formulated as a thixotropic gelcoat. Clear Gelcoat has excellent abrasion, water and chemical resistance when processed properly. It is also suitable for fiberglass and filler-reinforced polyester sanitary-ware.

Dry Air F720Aerosol spray for covering and protecting unused portions of urethanes and resin concentrates from the detrimental effects of moisture and air.

Easycast Clear Resin sets water clear so it is great for embedding objects. It has a 1:1 ratio by volume so no need for scales. Always use gloves when working with this product. Recommended for:Lures, Models, Tinted Parts, Lenses, PropsPotlife & Demould:Work time – 9 mins / Demould time – 2-3 hrsHardness & Type:Shore D80 +/-2 Rigid Polyurethane, 250cps

Easycast Polyurethane resin is a two component rigid urethane casting compound. Recommended for:Model Kits, Collectibles, Small Parts, Props, Thin CastsPotlife & Demould:Work time – 2-2.5 mins / Demould time – 10-20 minsHardness & Type:Shore D65 +/-2 Rigid Polyurethane, 60cps

Epoxycast Clear Casting Resin is a general purpose casting system for processing and curing at room temperature. Product highlights include: low initial viscosity, good thermal stability at temperature 20 degrees celsius to 70 degrees celsius, and good mechanical properties.

EPOXYGLASS is the preferred resin used by professional artists Australia wide. EPOXYGLASS is an equal part ratio, UV resistant epoxy resin. Works well with Barnes opaque and translucent pigments to produce beautifully finished artwork, as used in our candu resin art workshops.

The F-115 A/B system is a production oriented fast gel and fast demould material. Recommended for:Parts, Moulds, SFX, Props, Skins, PottingPotlife & Demould:Work time – 7-8 mins / Demould time – 3-5 hrsHardness & Type:Shore A15 +/-5 Polyurethane Elastomer, 1050cps

The F125 A/B flexible polyurethane system is a production oriented fast gel and fast demould material. Recommended for:Parts, Moulds, SFX, Props, Skins, PottingPotlife & Demould:Work time – 6-7 mins / Demould time – 2-3 hrsHardness & Type:Shore A25 +/-5 Polyurethane Elastomer, 1250cps

The F140 A/B flexible polyrethane system is a production oriented fast gel and fast demould material. Recommended for:Parts, Moulds, SFX, Props, Skins, PottingPotlife & Demould:Work time – 7-9 mins / Demould time – 2-3 hrsHardness & Type:Shore A40 +/-5 Polyurethane Elastomer, 1010cps

The F150 A/B flexible polyurethane system is a production oriented fast gel and fast demould material Recommended for: Parts, Moulds, SFX, Props, Skins, Rollers, MountsPotlife & Demould:Work time – 6-7 mins / Demould time – 2-3 hrsHardness & Type:Shore A50 +/-5 Polyurethane Elastomer, 1020cps

The F160 A/B flexible polyurethane system is a production oriented fast gel and fast demould material. Recommended for:Parts, Moulds, SFX, Props, Skins, Rollers, MountsPotlife & Demould:Work time – 5 mins / Demould time – 2-3 hrsHardness & Type:Shore A60 +/-5 Polyurethane Elastomer, 1310cps

The F170 A/B flexible polyurethane system is a production oriented fast gel and fast demould material. Recommended for:Parts, Moulds, SFX, Props, Skins, Rollers, MountsPotlife & Demould:Work time – 5 mins / Demould time – 2-3 hrsHardness & Type:Shore A70 +/-5 Polyurethane Elastomer, 1120cps

The F180 A/B flexible polyurethane system is a production oriented fast gel and fast demould material. Recommended for:Parts, Moulds, SFX, Props, Skins, Rollers, MountsPotlife & Demould:Work time – 7-8 mins / Demould time – 2-3 hrsHardness & Type:Shore A80 +/-5 Polyurethane Elastomer, 2810cps

The F190 A/B flexible polyurethane system is a production oriented fast gel and fast demould material. Recommended for:Parts, Moulds, SFX, Props, Skins, Rollers, MountsPotlife & Demould:Work time – 5 mins / Demould time – 2-3 hrsHardness & Type:Shore A90 +/-5 Polyurethane Elastomer, 3530cps

LSE Laminating Resin is a general purpose resin for spray or hand lay-up. Use with fiberglass or woven cloth. Requires the addition of MEKP catalyst.

MD-60 A/B is a two-component urethane casting compound that is specifically formulated for high abrasion and impact resistance. Recommended for:Rollers, Mounts, Abrasion Resistant, Form Dies, PropsPotlife & Demould:Work time – 15 mins / Demould time – 2-3 hrsHardness & Type:Shore D60 +/-2 Rigid Polyurethane, 2520cps

Methyl Ethyl Ketone Peroxide. The catalyst required for use with polyester resins. Catalyst ratio used varies for each product, refer to Technical Data Sheet for more information.

Use Neutral Brush Gelcoat as the first layer for making fiberglass moulds. It requires the addition of MEKP Catalyst. Designed to be used in combination with fiberglass and LSE Laminating Resin

Previously Clear Casting Resin This is a polyesterclear casting resin which is ideal for embedding objects, jewellery and picture frames. It requires the addition of MEKP catalyst and works well with PSTF pigments and Barnes plastic moulds.

Two-component rigid urethane casting compound that cures at room temperature. Recommended for:Ornaments, Props, Frames, Models, EmbellishmentsPotlife & Demould:Work time – 5 mins / Demould time – 1 hrsHardness & Type:Shore D65 +/-2 Rigid Polyurethane , 150cps

R-FOAM 100 is a foam urethane with a 96kg/m cubed system designed to allow the manufacture of self skinned or structural components. The system exhibits excellent fow characteristics and can be either hand or machine mixed.

R-FOAM 200 is a polyurethane foam system designed to allow the manufacture of self skinned or structural components

2017 Barnes Products Pty Ltd ATF Barnes Trust. ABN 14 915 042 805