How to Make Pressed Flower Resin Jewelry Part 1
You can tell I am having a lot of fun pressing flowers and using them in resin jewelry.I found pressing with a microwave was a lot quicker than the traditional method. Now comes the part where I work on getting these dried floral bits encased in protective coats of resin.
2 part epoxy resin* (I used Little Windows resin)
resin molds* (and mold release if they are not silicon or coated with mold release)
bezels (all but the round ones with the solid bails were fromNunn Design)
packing tape or sticky kitchen shelf liner (optional – for open bezels)
coloring dyes or backgrounds (see below for links)
sealant/adhesive (I used Mod Podge satin sealant)
drill (I used a spiral ratchet drill* – seetool review) and odd cut of wood
First mix up the two parts of resin according to manufacturers instructions. With Little Windows resin, the proportion for Part A: Part B was 2 : 1 . So I used scales for measuring by weight. Saved having to squint to see marks on small measuring cups!
A crucial tip from Fran ofLittle Windowsis to microwave Part A for 5-7 seconds before mixing with Part B. This step greatly reduces bubble formation. DoNOTmicrowave final mixtures. If you do that, the polymerization reaction is hastened and you will have almost no working time!! I actually tested this out and it was less than 1-2 minutes before the resin set.
I also mixed slowly and let the mixture rest for a couple of minutes under a lamp. Bubbles rise and can be moved to the side of the cup and popped. I am aware some people use a flame from a lighter to disperse the bubbles – not sure if that is such a good idea! I sometimes blow through a straw across the surface which works as well.
Carefully pour into the molds to get a thinnish layer. Pop any bubbles with a toothpick. Note, bubbles are harder to get rid of when using doming resin.
If you like to work with open bezels stick them on a piece of packing tape or sticky shelf liner before pouring the first thin layer of resin.
There are many ways to color resin or add a colored background.I covered some in this past post. Also check outLittle Windows post for even more ways. You can also add glitter to the resin if you like.
Cover and let the resin cure for 24 hours. Then it is time for the fun bit. Place your pressed flowers and leaves onto the first layer of resin. Seal and glue down the flowers with sealant. Do not overdo the sealant.
Cover and let the glue dry overnight. Then it is time to make up another batch of resin and add the second layer covering the flowers etc. Again cover the project to prevent dust from settling on the work during the curing. Full cure is about 24- 48 hours.
Then it is time to drill a hole for the bail! Add bails, jump rings and chain necklace to complete the project.
Just so you dont think that all this is super easy, lets have a look at pieces whichfailedwere learning mistakes. I keep saying this butexperimentation is very important. Much will depend on the types of flowers you use. For example, the yellow flowers on the square pendant below were not sealed so parts of them became translucent. The yellow flower on the round pendant was sealed.
I glued this pale pink African violet flower on a circle of shrink plastic hoping to make it into a simple pendant. A little too much sealant as it seeped everywhere (opaque area) !! I also didnt add an even coat of sealant on the flower.
The pale cream flower below left became translucent with the Mod Podge. The flower below right wasnt glued on properly so it floated to the side with the second coat of resin!
And then there were the composition errors with wrong background choices etc!
Here are the ones which were much better but not perfect. If I didnt say so, you wouldnt know this butterfly sticker was hiding a large bubble on the clover flower below!
Photographing the resin pieces was sometimes tricky because of their highly reflective surfaces. I took to propping this one up.
Despite all my precautions, I still have tiny bubbles happening. Makes me want to get a vacuum pump and chamber! That will truly take care of them.
If there is one thing I realized with my resin adventures is how much I really admire artisans who make real flower jewelry to sell. They do it so well. Their work is well worth paying for! This is truly a good example of how it seems easy enough until you try it yourself.
UPDATE : Check outPressed Real Flower Resin Jewelry Tutorial Part II Tips and Tricks
I used natural light my iPhone 6S with the camera+ app and the Modahaus TS320 tabletop studio and the Steady Stand (medium) for the final project pictures.The necklace is suspended from a Modahaus Steady Stand.The tutorial photos were taken in my windowless basement studio with artificial lights. Check out myHow to Photograph Jewelry Webinar.
I receive books and products for review. I do receive a small fee for any products purchased through affiliate links.This goes towards thesupport of this blog and to provide resource information to readers.The opinions expressed are solely my own. They would be the same whether or not I receive any compensation.
How to Make Real Flower Resin Jewelry(not pressed)
How to Make a Wire Vase of Flowers Pendant
Convertible Pip Bead Flower Bracelet Tutorial
I always wondered if the dried flowers must be sealed with mod podge or set in resin as is. Oksana of Alamould (resin art open forum on facebook) says (in a lot of her videos) that they can be used without sealing.
She is right in that many flowers and leaves do not need sealing. But I have come across some which do. So maybe seal all of them anywhere? We have to glue down the material anyway.
Pearl, I love this. I have a bracelet from years ago that has a pressed flower and now I know how I can make my own. Thanks
Hmmm – I wonder how Im going to seal my lilacs that I dried in silicone? They are definitely a project that would be too hard to seal unless they were maybe dipped in it and left to dry?
Youve got my mind off and whirling away about the possibilities once again. I know I dont deal well with failures – but Im trying!
I have a pendant from Shireen where she dyed the flower turquoise. She told me putting flowers in resin was very difficult and frustrating. You wouldnt know it from her work would you.
You mean dried in silica, not silicone.
Depending on how sturdy the dried flowers are, I would clip them upright and spray with a sealant several times, during in between. In a ventilated place, naturally.
As you can see from my adventures, it is not as easy as most might think. One has to allow for failures at each step. I accidentally tore some of the dried flowers!!
Eeek! A typo!! Of course I meant silica!!!!
Good suggestion for sealing them my friend. Thanks!!
These are so pretty! I hope to try some of my own someday.
Do have a business? Your work is beautiful.
I cant wait for spring! I am going to try it with glossy accents too and see what happens. Thanks for the great tutorial.
Ive seen a lot of blogs that talk about polishing the resin to make it clear and glossy. Did you have to polish these pieces? If so, what process did you use? They are beautiful!
I didnt have to in this [articular case. The very smooth resin mold I use has mold release and the pieces came out without any problems. I did have to sand the edges. Resin does get a bit scratched with use. I have tested out a couple of different kinds of polishes – see this comparative post :
I love them so much! Thanks for sharing such good pressed flowerdiy tutorial.
Youre AWESOME! Thanks for the comment and feedback. You do make a difference on my blog!
Brings You the Best of Handmade JewelryMore About Me
How to Make Real Flower Resin Jewelry
How to Dry Dandelion Clocks and Flowers Using Crystal Cat Litter
Handmade Greek Jewelry Making Components from TreeTerracom
Gemstone Chip Beaded Fringe Necklace Tutorial
Pearl Earrings Tutorial Features Wire Wrapped Prong Style Bead Cap
Learn how to take better pictures!!for my special webinar mailing list to learn when the next webinar will be and get information.