Welcome to Recipe Central. You will find many bubble juice recipes here on the wiki. If you are curious to learn how bubble juice works and what the various ingredients do, take a look atBubble Juice Basics.

This page provides recipes for people that want to make their own bubble juice. There are excellentcommercial productsavailable for those that prefer not to brew their own juices.

This recipe list isnotin order of preference or quality. It is more-or-less in order that the recipes were added although there are exceptions. The page is in the process of being re-organized (August 2013). You can see how most of these recipes perform by taking a look at the related videos and pictures. Your success with these recipes will depend quite a bit on the conditions and your bubble wand.

If you want to learn what makes bubble juice work, readBubble Juice Basics.

What is the best bubble juice? Read Edwards thoughts aboutthe best bubble juice.

If you are looking for a recipe that uses easy-to-find ingredients and also creates world-class bubbles (of any size), I recommend trying this simpleguar-based recipe.

All of the recipes on this page are capable of creating great bubbles. What you like best will depend a lot on your own personal preference.

Popular recipes include: theguar-based recipeandMikes Gooey MixandMikes Stir n Go mix. Many people are fond ofeGoo super-concentrate, but it takes some experimentation to get the amount ofPEOright as it seems to be sensitive to variations of PEO potency. If you are serious about bubbles, try anHEC-based mix, too.

If you spend much time browsing the internet, you will notice how radically recipes vary. For example, one finds water to detergent ratios of (by volume) anywhere from 1 to 1 to 20 to 1 — usually, however, you dont get to see the solution in action or know how it compares to other solutions. At this Wiki, we are trying to engage (as much as possible) in fact-based postings. When adding recipes provide as much information as you can about your water quality and how you use the solution — and add pictures or link to movies.

It is quite possible that the radical variations that people recommend are because of variations in local atmospheric conditions (a solution that works well in a locale with high humidity may not work well in a locale with dry air) and water quality. While tap water seems to work as well as (or better than) distilled water in most recipes in most locales, some recipes may be more sensitive to the qualities of the water than others.

As time goes on, we hope to document (in other articles) the relative characteristics of different detergents and even different tap waters in the hope of determining whether there is a way to predict whether one should be using tap or distilled water for a partciular recipe.

If you try a recipe, please add a comment to indicate its success or failure or any adjustments that you found beneficial.

Only submit a recipe that you have actually used

Recipes should be actual recipes rather than an advertisement for a commercial bubble product.

If you have a commercial interest in any of the ingredients used in your recipe, please make note of this interest in your entry.

Add your recipe at the bottom of the page.

If possible, please provide pictures or video of the bubble solution in action and make a note of what sort of bubbles you make with the solution.

All recipes, photos and videos provided with the creators consent.

If your submission does not follow these guidelines, we may remove it from the wiki.

When the wiki started, there were only a few recipes. The number of recipes has grown a lot and continues to grow. We get a lot of questions asking for thebest recipe.

Which one should you start with? There is no best recipe. Our own extensive testing plus reports from countless enthusiasts (amateur and pro), leads us to say that people have diverse preferences. So, we recommend that you experiment with a few recipes and see what works for you.

While there is no single best recipe for beginners (for the reasons why see the pageBest Bubble Juice), we can offer some advice. Theguar-based bubble juicehas become very popular since it was published as it is easy to mix, uses ingredients that are generally available locally and makes world-class bubbles. There may be recipes that you will eventually find even better, but many people are so thrilled with the bubbles that they stick with it. Brian Lawrencessimple mixuses easy-to-find ingredients and many love it. Glowby has provided his version of Brians mixhere.

If you have J-Lube or PolyOx WSR301 (seePEOandIngredients) you might findMikes Gooey MixorMikes Stir n Go mixoreGooa great place to start. Or you might try mixing up someBubble Power PowderBrian Lawrences recipes arealso popular with some.

If you haveHEC, one of our favorites isEdwards HEC recipe.

All the recipes here have been used to create great bubbles.

Detergent. The detergent you use is critical. See theDetergentarticle for our current recommendations.

Starting Out. We cant emphasize enough that if you are getting started, it is worth following the recipe slavishly. A great many requests that we get for help are the result of making ingredient substitutions or amounts from the get-go. Resist the temptation to second guess the authors until you have some experience. We encourage experimentation, but we recommend that you get something working before improvising.

Bubble Juice Basics. Want to know more about what makes bubble juice tick? SeeBubble Juice Basics.

Equipment and Environment. One last thought for those getting started. Your equipment and the environment (heat, humidity, wind, pollen, pollutions, etc.) have a huge impact on the bubbles you make (or the ability to make a bubble at all). If a recipe isnt working fo you, it is worth giving thought to whether the equipment orconditionsmight be part of the problem.

For commercial bubble juice and mixes, see theReadymade category. These products include concentrates and powders to which you add water or water and detergents. For the casual bubbler, commercial mixes are often the way to go.

A free-floating (though short-lived) giant from this session. 1.5 grams guar/liter water

[Added June 2012] This simpleguar gum-based recipeis quite effective — especially if you dont have J-Lube or PolyOx WSR301. It may actually outperform PEO-based mixes (i.e. those with J-Lube or PolyOx) when conditions are dry (30%-45% humidity).

This is a great recipe with which to get started as it uses ingredients that can usually be sourced locally. The recipe is so forgiving that a 4 year-old can mix it up. A video showing how to make this bubble juice is available onits recipe page.

Watch in HD on YouTube! Some highlights of an epic session. This was a slight variation of this recipe that used table salt as a dispersant when hydrating the guar

2012 07 12 guar juice bubbles-in-bubbles

Bubble-in-bubble is easy with guar-based mixes with the correct amount of guar

This is not a bubble juice recipe per se. BLM is a polymer mix that turns water and dishwashing liquid into great bubble juice.See the full recipehere.

Read theJumbo Juice article forthe recipe of one of the premier giant bubble recipes — which is also great for small bubbles and bubble sculpture, too.

This is a convenient J-Lube based powder mix that you can make from J-Lube and citric acid. I make pre-measured packets that I can give to friends that want to make giant bubbles but dont have the precision measuring equipment needed to work withPEOorcitric acid. — Edward Spiegel.

Mike making great bubbles with this mix.

Mike Miller is the founder ofSBF, the Soap Bubble Fanciers Yahoo Groupwhose beautiful videos speak for themselves. Mike recommends mixing this up as concentrate and mixing on site with distilled water. Mike has a lot of great video of his bubbles at hisBubble Projectsite.

This concentrate is diluted 8-to-1 (water-to-concentrate) which yields a 17:1 water:detergent ratio.

Ingredients(for concentrate to be mixed with two gallons of water):

Into a 4-cup (1 liter) or larger container (Mike uses a 4-cup measuring cup):

Pour in 2 cups of warm/hot tap water.

VERY QUICKLYadd 4 grams J-Lube powder and immediately stir briskly with a large fork creating a convection-shaped motion within the mix rather trying not to froth/foam the surface. Continue beating until there are very few clumps left. This will take a minute or two with a healthy wrist.

Making one gallon of concentrate. When Mike mixes this up, he pours the concentrate into a gallon jug and repeats the steps 3 more times to create one gallon of concentrate.

To make the bubble juice, add two cups of concentrate to one gallon of distilled water. (Edward notes: unless you have really bad water, you should be able to use tap water without ill effect).

Mikes notes. Mike notes that the concentrate seems to improve with age for at least a few weeks. He typically mixes it up the night before a bubbling session and will turn the jug end-over-end, jiggle and shake the jug of concentrate to before going to bed and before making bubbles the next day to make sure that it is well mixed. He uses cotton piping cord for his tri-string loops and fabulous garland wands. He prefersWrights 6/32 inch Cotton Piping Cordwhich can be found at Joannes Fabrics among other places. Note: this cord is also available as Wrights 6/32-inch Cotton Filler cord. As such it is often available in the sewing needs section of Walmart.

J-Lube Note(March 2015). The amount of J-Lube used is quite a bit compared to many other recipes. We suspect that this amount may need to be adjusted down somewhat if you are using full-potency fresh J-Lube. If the diluted mix is TOO stringy (seePEO), try using half the amount of J-Lube.

NOTE:Do not worry about the white sediment that appears at the bottom of your container. It is totally normal in any mix that includes baking powder. Baking powder has a lot of corn starch in it. Corn starch is insoluble in room temperature water. The corn starch in baking powder (at least in the 3 brands that I have tried) is not even soluble in warm and hot water unlike normal corn starch. The sediment does no harm, and there is no benefit in trying to get it to incorporate into the mix.

An anonymous user posted this comment: (June 2015) Dawn Ultra (2X on label) is easiest to find in most U.S. Supermarkets and I found that mixing the J-Lube and baking powder with the Dawn first (I used a cleaned emptied Gatorade plastic bottle) was an easy way of dissolving the powders It is a real gooey mix but then I added to the water at 18:1 ratio and got nice bubbles and mix was good for 1 week plus Still trying to get longer lasting than 5-10 seconds.

Edward Spiegel replies to the anonymous commenter: I would recommend seeing if you can track down Dawn Pro, you may see an improvement in the performance. What size are the bubbles you are making and what are the temperature and humidity? If these are giant bubbles in dry weather 5-10 seconds would be great. If these are giant bubbles in decent conditions, the results are not what one would expect.

All bubbles made in this video made with this recipe

A fabulous video made with the solution described here (some shots in the video make use of Sterlings recipe).

Mike Ashe writes: This recipe which I call Stir & Go is a variation of Mike Millers Mikes Gooey Mix found at Soap Bubble Wiki. I did a LOT of experimenting to get these amounts just right.

1.25 cups of Dawn Professional Manual Pot and Pan detergent

2 level teaspoons of Clabber Girl double acting baking powder (Other baking powder should work too)

.5 level teaspoon (1.5g) of J-Lube (see note)

Fill bucket with 1 gallon of the hottest tap water possible. (Mark your bucket at this level for future mixes so you can fill directly from the sink)

Sprinkle in the J-Lube as slowly as possible to avoid clumping while quickly stirring the water with a chopstick. (I use a coated/lacquered chopstick to keep the J-Lube from sticking and accumulating on it, you can probably use a knife or fork)

(Mark the bucket at this level for future mixes)

Pour in the Dawn and let it settle on the bottom of the bucket without stirring.

Now, sprinkle in the baking powder while quickly stirring the entire solution. You may feel the solution thicken after a few stirs!

Once all the baking powder on top has been mixed in, youre ready to make some awesome bubbles.

Dont forget to pray for gentle and steady wind, high humidity, and no bugs!

IMPORTANT NOTE: The amount of J-Lube you use may have to be adjusted. This recipe is based on full-potency J-Lube. The result will be a slightly string mix. The amount of J-Lube is about 8 times what we call the nominal minimum effective concentration (NMEC) of fresh J-Lube (seePEO). If your mix is not stringy (see thePEOarticle) at all you may need to increase the amount by 2-4 times.

Wayne Schmidt performed extensive testing of a number of recipes and recipe variants and came up with a J-Lube and Surgilube based recipe that you will findhere. On hisrecipe page, you will also find a link to the excellent page where he details his search for the ideal bubble recipe.

2013 01 05 Session. HEC from 3:1 concentrate

HEC-based recipes can compete with any bubble juice for any sized bubbles. Edwards favorite recipe for

is one of the HEC recipes. Check outEdwards HEC-based bubble juice recipes. Another recipe to check out is Edwards HEC-PEO mix that he callsHECP.

Sterlings Mix (giant bubbles and smaller)

In the Soap Bubble Fanciers Yahoo group, Sterling Johnson who creates amazing bubbles with just his hands and bubble juice haspublishedhis preferred recipe which is reproduced with the authors permission. It is very good at different dilutions for anything from small to large bubbles. It can be used with your hands as the wands or with traditional bubbling equipment.

1 part (by volume) – Dawn Hand Renewal Diswashing Liquid

1/8 part (by volume) – Dawn Pro Manual Pot & Pan Diswashing Liquid

1 part (by volume) – Mr. Bubbles commercial bubble mix or other (see notes) if you cant find Mr. Bubbles

1/8 to 1/4 part (by volume) – Glycerine

Combine the concentrate ingredients. If you can leave it uncovered overnight,it may improve the mix. Combine 1 part of concentrate with 6 parts water. Add BLM at the rate of 1 to 4 ounces per gallon. Sterling notes that he uses a little less than 6 parts water for indoor work.

If you cannot find Mr. Bubbles, Gazillion Bubbles (the one in the green bottles) is a nice substitute. Edward believes that Amazing Bubbles or other solutions from Placo would work well, too. Miracle Bubbles and Super Miracle Bubbles probably dont work so well.

Glowby has posted a recipe and tips for a mix inspired by Sterlings mix (see above). This is a nice all-around mix.Glowbys Flexible Mix

Todd Kamisugi has gotten very good results with a mix he developed from ingredients available at Walmart. The results which you can see inthis videospeak for themselves.

He mentions that he is in Hawaii and should probably list high humidity as an ingredient, too.

In the video, he is using 20 foot fishing poles (Kwik Stix Bream Poles purchased from WalMart) which are shown below. The loop is made from a single strand of Acrylic knitting yarn (also shown below). Todd mentions that the two end sections of the fishing poles needed to be removed because the wet loop was too heavy for the thin end sections.

There is a thread about this recipe onSBF.

Lionel putting the solution to good use

Some nice tubes made with a variant of this recipe

Lionel Stanhopeprovides this recipe from London with ingredients easily found in the UK with the aid of Ebay. The recipe makes 9 litres.

200 ml Fairy washing up liquid [Lionel likes the yellow version]

4 ml (just under 1 teaspoon) J-Lube powder

Pour 1 liter of tap water into a saucepan with a capacity of at least 2 liters and bring to a boil. While the water is coming to a boil:

Add 7 liters of hot tap water to a 10 liter bucket.

Squeeze in 200 ml of Fairy washing up liquid.

Add 40 ml of glycerin and stir gently with a long-handled wooden spoon.

Now, the saucepan should have come to a boil. Turn off the heat. Gently stir 20 grams of KY Jelly into the water until it has completely dissolved. Your water will be slightly cloudy. Start stirring again and add the JLube powder (while stirring with the other hand). Continue stirring until the J-Lube has dissolved and the solution is smooth. Add 1 liter cold water to the water/KY Jelly/J-Lube mix and stir. The addition of the cold water will cool and thicken the mix.

Pour the contents of the saucepan into the bucket that contains the water/Fairy/glycerin mix. Stir to mix. Be careful to avoid creating too much foam (i.e. create as little as possible. This mix is ready to go as soon as it is cool enough to handle. The solution may thicken or get a little stringy over time. If this happens, add a little water to balance it out.

Early Morning Bubbles. Hilly Fields. London SE4

Lionel demonstrates his bubble juice

Comments in this formula originally byBig Bubbler(This is a wiki so who knows who wrote it last:-))

This is a complicated mix that makes very large and somewhat light weight bubbles. This mix uses pretty easy to find ingredients. This mix does not keep well once fully mixed up, esp. if used (dirty)(maybe a couple weeks if stored cool but not too cold). This was the best mix I knew of in 2005. I think better mixes are being figured out by the folks on this Wiki:-). C

It is good to remember, when you have a good mix, You still need special air qualities for the really big bubbles. If your formula is one that is supposed to be good for big bubbling and does not seem to be working, it is usually an air quality issue. The answer to Whats the best formula? depends on Wand Size and Material, the conditions of the bubbling site and your bubbling goals. If I say I think something works better, that means I think it makes bigger bubbles. Any big bubbling mix should also work great for small bubbles as they are easy to make.

When Proctor and Gambel (maker of Dawn and Joy) messed up the dishsoap formulas again (so our regular simple formulas quit working), we began to look for a new one. In 2005 Ehud the Bubbleman joined in the fun here in Oregon. He became somewhat obsessed with bubbling and with very open-minded bubble formula experiments. After hundreds of hours of testing my ideas and his ideas and those discussed on the Soapbubblefanciers Yahoo group, we came up with this formula that works well (even in light to medium rain)! This batch makes a pretty full 5 gallon bucketful: sorry, I dont have the metric conversions handy.

10 minutes of general bubbling w nice music

Doing Donuts When low wind (camera phone Quality)

The kind of beer may not be important?

1 and 1/2 Gallons of steam distilled (only) or good quality very clean water

20 to 25 ounces Dawn Complete (Dishsoap), green or blue (Can be replaced with another P&G Dishsoap)

25 ounces Dawn Lift-Action, red (wildflower Medley) or Yellow (Can be replaced with another P&G Dishsoap)

CThis, I call the base mix. This seems to store pretty well and so I wait to add other stuff until Im within a few days of bubble time (where I will use it up).

The lubes: CIn advance, I mix up the lubes with another 2 gallons of water. CSome of the lubes need to be premixed a day or more ahead.

4 ounces Astroglide (personal Lubricant), purple box into one gallon of water. (Found in the unmentionables department)

2 and 1/2 ounces of Equate (personal Lubricant)(a walmart brand) into 1/2 Gallon of water. wallmart sucks and you may be able to substitute a pharmacy product called Surgilube.

6 to 8 ounces Light Karo Corn Syrup into 1/2 Gallon of water.

CShake the lubes occasionally and before adding to the base mix. I often store a gallon or so of most of these premixed lubes for months without any noticible problems. The Karo Syrup is an exception as it does start to grow black stuff in the jug after a month or more.

The Beer: CLastly, one beer. We use an 11 ounce Full Sail Session Lager (5.1% alch.) CThe beer is not crucial, if it is not an option. Try your mix without it and then add it to see what you think. We think it helps.

Half as much Glycerine is often substituted for the corn syrup. Mr Bubbles bubble mix is often given higher reviews when compared to Miracle Bubbles. My feeling is that the Mr. is a better product, however, it was not really available here in large amounts . I do not know if the 2005 mix would be better with the Mr.. Increasing the Dawn complete (while decreasing the Lift action) will make the mix more self-healing and better for bubble tricks. Useing a pure powerful cleaning type Joy or Dawn (no Complete) is less forgiving but is best for making the biggest bubbles.

Add the water and Fairy into a bucket. Sprinkle the baking powder while stirring the mix. Add 50ml Glycerin into a measuring jug or small bowl. Add all of the Xanthan and Tylo powders into the Glycerin while mixing with a spoon. Pour Glycerin and Xanthan/Tylo mix into the bucket while stirring the mixture. Add another 50ml Glycerin into a measuring jug or small bowl. Add the Polyox into the Glycerin while mixing with a spoon. Pour Glycerin and Polyox mix into the bucket while stirring the mixture and continue to stir for 3-4mins.

The string that I use with the above mixture is 7mm white 100% Cotton Piping Cord.

[EDWARD NOTES: Adamremarks thatthe Tylo powder is optional as his friend gets great results when omitting it. If you try this recipe, try with and without the Tylo powder and let us know what you think.]

A monster bubble made with homemade bubble juice and wand.

]. This recipe makes a concentrate that you can dilute at anywhere from 3-to-1 to 5-to-1 depending on your preferences and conditions. Edward writes: This is a reliable juice whose concentrate is stable for years. In 2011, this was my preferred PEO mix thougheGoois my current favoritePEOmix. It is versatile and easy to mix up. It is a concentrate that you mix 1 to 3 with tap water. I measure out the ingredients for the concentrate by weight but often dilute by volume as the proportions are such that it makes no noticeable difference unless you are very sloppy when measuring out the ingredients. You can use as little as half as much or as much as twice as much PEO. Try it with a range of amounts and see what you prefer.

CONCENTRATE: The proportions I give here make about 8 fluid ounces of concentrate which is convenient for me when making up concentrate to give to friends. Simply multiply to make larger batches.

Beach Giants made on a windy day with this recipe.

This concentrate is apparently quite stable. In May 2014, a friend found a bottle that I mixed up in Autumn 2011 and it worked perfectly. A question has been raised on SBF as to whether baking soda/citric acid may negatively influence shelf-life. This seems not to be the case as I have had mix that was left over after a session that worked fine more than one month later and concentrates that were fine after two months.

When diluted, this yields a solution that is 12.2 parts water to 1 part detergent and is .010% high molecular weight PEO. It also contains 1 gram baking soda per quart (liter) of water and .5 to .77 grams citric acid per quart of water. You will notice that I dont add any glycerine as I am finding that the amount of glycerine needed to benefit a dilute solution is so high as to be prohibitively expensive and the difference is pretty subtle when making giant bubbles outdoors.

I sometimes add the baking soda to the water then add the PEO-containing stuff (BLM, WSR301, J-Lube, or whatever) then add the detergent and then add the citric acid. Sometimes I add the baking soda and citric acid together to the water and then add the other ingredients.

NOTE MAY 2014: This juice will work even better if you had 1/2 tsp baking powder per liter (or quart) of bubble juice) AFTER diluting it. Try diluting this at 4 to 1 (water to concentrate) or even 5 to 1) and compare to the recommended 3 to 1.PEO NOTE: As with all PEO-based solutions (that is that use PolyOx WSR301 or J-Lube), you may need to experiment with the amount of PEO as its potency changes over time.

Brians competition mix. Brians go-to recipe for professional bubble-making.

Brians Simple Mix. Brians recommendation for people looking for a recipe that can be mixed from easy-to-find ingredients.

I have made ~1000 liters of this solution over the last 3 years. I found it on HAKAs website (they make the neutral soap) to which I added more details on mixing, which ingredients can be found in Austria/Germany, technical details about the ingredients and translated into Germanwhich can be found here.

Here are the instructions to make 10 liters of liquid for about 5€:

500g (fine or regular) granulated sugar, although powdered seems to also work (but is slightly more expensive).

25g wallpaper paste which contains Methyl cellulose. Avoid any special ones e.g. extra strength, etc. containing extra ingredients, just get the regular boring stuff. I prefer Henkel brand which is ~5€ for 125g. Swing Decor seems to also work fine and may be purchased at most hardware stores (e.g. Obi). It may also be possible to make your own, there are lots of recipes online, but I have not tried yet. Do NOT use OBI Classic!

750g HAKA neutralseife (neutral soap?). 5 kg costs ~19 Euro + shipping.

9L of regular tap water. Some bubble purists will say distilled water is important for bubble recipes, but from my testing there is zero noticeable difference, except that its not free, is difficult to transport and its not safe for human consumption (not that I recommend drinking bubble liquid, but when children play with this liquid, its naturally better to have safe ingredients).

1L luke-warm water and sugar. DO NOT HEAT AND MIX. Mix until no more sugar particles. It should take about 5 minutes before the sugar is completely dissolved.

Add 25g of wallpaper paste. Mix for about 5 minutes until liquid is very thick and slimy.

Add 750g of HAKA soap. Mix thoroughly until thick and creamy. I usually mix for about 5 minutes.

Add ~8 liters of regular cold tap water (or until your 10L bucket is full). Mix thoroughly (and gently) as you add the water. A lot of foam will appear during this process, so it may be necessary to add some water now, let it rest for a few hours until the foam goes away, then add the rest of the water later.

Large bubbles adhesive wallpaper, fairy, sugar

Write the text of 5 grams per liter of glue Metylan Normal (certainly available in OBI) cost 15 zł per pack

1 liter of hot tap water (approximately 60 degrees in the tank 6 liters)

how do 4 liters of solution is poured 20 grams of glue.

Spin the bottle 3-5 times strongly shaken bottle.

Topping 3litry cold water from the tap. 2x shaken bottle

Every morning and evening, pour the solution in the bottle

The solution was heated to 36-37 degrees

I add 50 grams of sugar per liter, mix 2-5 minutes

mix about 5 minutes, so you can mix to achieve better results

I leave with fluid on the balcony at night

The next day, you can no longer useour article here!

5 gram na litr kleju do tapet Metylan Normal (na pewno dostępny w OBI) koszt 15 zł za opakowanie

Prościzna 1 litr gorącej wody z kranu (około 60 stopni w baniak 6 litrw)

jak robimy 4 litry roztworu to wsypuję 20 gram kleju .

Zakręcam butelkę , 3-5 razy b.silnie wstrząsam butelką.

Dolewam 3litry zimnej wody z kranu. 2x wstrzącham butlą

Codziennie rano i wieczorem , przelewam w butli roztwr

dodaję cukier 50 gram na litr , mieszam 2-5 minut

Mr. Hisao Oono of Japan creates some of the worlds most amazing bubbles. His recipe ishere. You will find many images of his great bubbles on hisblogwhich I highly recommend. Unfortunately, this recipe requires ingredients that seem to only be available in Japan.

EGoo. Super-concentrate for Giant Bubbles

Added April 2012. This is Edwards recipe for a super-concentrated goo that can be diluted with 12.5 to 22 parts water! It makes great colorful, giant bubbles. Ingredients: water, detergent, WSR301 (or J-Lube), baking soda and citric acid.

Click here to see the recipe and details.

HECPsometimes called HECWSR is a recipe that uses bothHECandPEO. It is great for all kinds of bubbles including endless tubes and supergiants. Works great for small bubbles, too.

These recipes are viscous bubble juices for those that like slow-flowing mixes. They are capable of creating long tubes and beautiful giants.PHC Recipes.They use PEO, HPMC and CMC.

Worker 11811s Big Bubble JUICE – Aug. 2014

Added August 2014, clickhere tovisit this guar gum and J-Lube based recipe.

The recipes below are include for completeness. They create great bubbles and were among the first recipes posted on the wiki. They no longer represent the state-of-the-art, but they are still solid recipes.

This is a reliable big bubb