PU casting material for vamp of shoe Two part PU material for vamp of shoe

PU casting material for vamp of shoe, Two part PU material for vamp of shoe

PU material for vamps of sneakers (CPU-60-6A-A/B)

PU material for vamps of sneakers (CPU-60-6A-A/B)

Excellent cold and bending resistance

Two components PU casting material for vamps of sneakers

Mixture of polyol, hardeners and additives

Bending 100 thousands times at -15,

*Testing sheet making: Press the sheet at 100for 30mins, place it at room temperature for 24hrs.

Physical properties testing condition: 232.

CPU-60-6A-A/B is two components PU casting material. Its hardness is adjustable. It has good elasticity, high strength, excellent adhesion with textile, easy operation, good flexibility under the low temperature, outstanding performance on hydrolysis resistance and yellowing resistance.

Heating temperature of CPU-60-6A-B: in summer 60-70, in winter 70-80. Heating temperature should be lower than 85, heating time should be 6-10hrs until the solid is melt to liquid entirely. Heating time cannot exceed 12hrs.

Put CPU-60-6A-A along with its pail into the oven with the temperature of 70-80for 6-10hrs until the solid is melt to liquid entirely. Heating temperature should be lower than 85and heating time cannot exceed 12hrs.

Put the entirely melt materials into the oven with the temperature of 40-50for heat preservation.

Before using, the well heated materials should be agitated evenly especially CPU-60-6A-A. Because CPU-60-6A-A contains chain extender and many additives, it must be agitated evenly before usage.

Take adequate quantities of CPU-60-6A-A/B and seal their containers at once. Then, put them in the oven with the temperature of 40-50for heat preservation. CPU-60-6A-B is active and easily reacts with moisture in air to cause NCO value to decrease, form a dry layer on its surface, cause the hardness and property of finished product to decrease and make reaction speed slow so dont pour too much and use it up as soon as possible.

CPU-60-6A-A/B should be stored at dry, cool and ventilated place to prevent from direct sunlight.

CPU-60-6A-B easily reacts with moisture in air. Please use it up in the shortest time. Especially in the humid seasons(e.g. summer and spring), seal the container well at once and put it in oven after open it.

Dont pour CPU-60-6A-B too much while waiting for mixing with CPU-60-6A-A to avoid exposing CPU-60-6A-B under the air to react with moisture and deteriorate.

The shelf life of the sealed well materials is 2 months. (The temperature of storage environment should be at 16-24)

CPU-60-6A-A 18kg/golden pail, 200kg/blue drum

CPU-60-6A-B 18kg/golden pail, 200kg/black drum

*These items are provided as general information only. They are approximate valuesand are not considered part of the product specification.

Liquid Urethane for Mold Making & Casting

PU Coating for Wire Guide Roller (WGR)

PU V Pulley for Wafer Slicing Equipment

Liquid Urethane for molding & Casting

Liquid Urethane for molding & Casting

PU Coating for Wire Guid Roller (WGR)

PU V Pully for Wafter Slicing Equipment

Water-based Adhesive (For Shoes/Economical grade)

Liquid Urethane for molding & Casting

Two-component casting PU material for concrete mold

TPUCO Develops Economical Grade Water Based PU Adhesive

Taiwan PU Corporation (TPUCO) will exhibit at the worlds largest plastic and rubber fair, K2016

ADD: 3F-1, NO.9, WU-CHUAN 1ST ROAD, SINJHUANG DISTRICT, NEW TAIPEI CITY, TAIWAN, R.O.C (NEW TAIPEI INDUSTRIAL PARK)

© Taiwan PU Corporation All rights reserved.Tel886-2-22991666Fax886-2-22991888E-mail

Taiwan PU Corporation (TPUCO) is a professional manufacturer and a world-class factory ofPU material for vamp of shoe, PU casting material for vamp of shoe, Two part PU material for vamp of shoe.With our leading producing technologies, TPUCO can produce various kinds ofPU material for vamp of shoe, PU casting material for vamp of shoe, Two part PU material for vamp of shoeaccording to clients requirement.TPUCO assures customers of the reliability and the top quality of thePU material for vamp of shoe, PU casting material for vamp of shoe, Two part PU material for vamp of shoe.MoreCasting CPU,TPU Granules,PU Adhesives & Hot-Melt,Pneumatic Tubes,PU Beltings,PU Moulded Products.